Engineering Materials
PET-CF
In Stock
INTO SERVICE — 1 in stock
INTO STORE — 10 in stock
Share:
220 ₾
- Filament Diameter
- 1.75 mm
- Nozzle Temp
- 280–320 °C
- Bed Temp
- 80 °C
- Print Speed
- 40–200 mm/s
1
Next day delivery in Tbilisi — 10 ₾, free over 3 kgFree to collect in storeWarranty on all productsSecure card & cash payment14-day returns
Specifications
BrandQIDI
ColorBlack
Weight1 kg
Material Properties
Printing
Set these in your slicer before printing.
Needs Hardened Nozzle
Filament Diameter1.75 mm
Nozzle Temp280–320 °C
Bed Temp80 °C
Print Speed40–200 mm/s
Maximum Drying Temperature100 °C
Mechanical
How a printed part behaves under load — higher is stronger.
Tensile Strength72.51 ± 1.39 MPa
Flexural Strength114.47 ± 1.89 MPa
Flexural Modulus5345.71 MPa
Impact Strength7.75 ± 1.08 kJ/m²
Elongation at Break2.49 ± 0.22 %
Thermal
How much heat a printed part takes before it softens.
Melting Temp251 °C
Vicat Softening Temp148.8 °C
Heat Distortion Temp86.7 °C
General
Basic figures for comparing this material with others.
Density1.3 g/cm³
Moisture Absorption0.5 %
Properties
Traits this material has, at a glance.
CompositeHeat ResistantChemically Resistant
Other
Manufacturer figures that don't fit the groups above.
Melt Flow Index6.8 g/10 min
